Observation of the "self-healing" of an error field island in the large helical device

It was observed that the vacuum magnetic island produced by an external error magnetic field in the large helical device shrank in the presence of plasma. This was evidenced by the disappearance of flat regions in the electron temperature profile obtained by Thomson scattering. This island behavior depended on the magnetic configuration in which the plasmas were produced.     

The effect of iron spin transition on electrical conductivity of (Mg,Fe)O magnesiowüstite

We measured the electrical conductivity of Mg_0.81Fe_0.19O magnesiowüstite, one of the important minerals comprising Earth’s lower mantle, at high pressures up to 135 GPa and 300 K in a diamond-anvil cell (DAC). The results demonstrate that the electrical conductivity increases with increasing pressure to about 60 GPa and exhibits anomalous behavior at higher pressures; it conversely decreases to around 80 GPa and again increases very mildly with pressure. These observed changes may be explained by the high-spin to low-spin transition of iron in magnesiowüstite that was previously reported to occur in a similar pressure range. A very small pressure effect on the electrical conductivity above 80 GPa suggests that a dominant conduction mechanism changes by this electronic spin transition. The electrical conductivity below 2000-km depth in the mantle may be much smaller than previously thought, since the spin transition takes place also in (Mg,Fe)SiO₃ perovskite.     

Hyperfine anomalies of Sc isotopes (A = 44, 44 m, 46 and 47) in iron

Nuclear magnetic resonance on oriented nuclei (NMR-ON) on Sc isotopes (A = 44, 44 m, 46, 47) in Fe were performed. Using the known magnetic moments the magnetic hyperfine fields were determined. The hyperfine anomalies of various Sc were deduced; ⁴⁴Δ⁴⁷ = 0.0 (12) %, ^44mΔ⁴⁷ = 1.2 (4) %, ⁴⁶Δ⁴⁷ = 2.7 (8) %. The measured hyperfine anomalies are briefly discussed based on the shell model.     

Electric conductance of metal nanowires at mechanically controllable break junctions under electrochemical potential control

We have developed the mechanically controllable break junction setup with an electrochemical cell (EC-MCBJ) to measure the electric conductance of metal nanowires under electrochemical potential control. The electric conductance of Au nanowires was investigated in 0.1 M Na₂SO₄ solution using EC-MCBJ. The conductance of the Au nanowires was quantized in units of G₀ (=2e²/h), showing clear features in the conductance histogram. The atomic contact with a specific conductance value was kept for >5 s, indicating the relatively high stability of the present EC-MCBJ system.     

Microscopically controlled oxidation of H/Si(1 0 0) by lateral surface electric field studied by emission electron microscopies

The ultrathin oxidation of a H/Si(1 0 0) surface with microfabricated pn-junctions was studied by photoemission electron microscopy (PEEM), mirror electron microscopy (MEM) and microscopic X-ray photoelectron spectroscopy (μ-XPS). The ultrathin oxidation inverts the contrast of the junctions in PEEM images. It is found by analyzing the intensity profiles of images that the potential distribution across the pn-junctions is also inverted by the oxidation. The charging of the oxide by ultraviolet irradiation from a light source of PEEM is attributed as the cause of the inversion of the contrast shown by μ-XPS and MEM.     

Determination of residual activities in 99mTc generators and 81mKr generators

The residual activities present in spent 99Mo-99mTc generators and 81Rb-81mKr generators were determined from a view point of the disposal of radiopharmaceuticals. The results showed that seven kinds of residual nuclides such as 95Zr-95Nb, 103Ru, 90Sr, etc. were found in 99mTc generators with maximum level of 740 Bq/3.7 GBq (0.02 muCi/100 mCi) at one year after the reference date. In 81mKr generators one year old, six nuclides such as 57Co, 83Rb, 84Rb and others remained and these activities were less than 3.7 kBq/370 MBq (0.1 muCi/10 mCi). On the basis of these data, the disposal of 99mTc generators and 81mKr generators is discussed.     

Laccase‐catalyzed polymerization of lignocatechol and affinity on proteins of resulting polymers

For the synthesis of a new biologically functional polymer from a natural resource by an environment‐friendly method, the laccase‐catalyzed polymerization of a lignin‐based macromonomer, lignocatechol, was carried out for the first time in ethanol–phosphate buffer solvent system to give crosslinked polymers in good yields. Lignocatechol was prepared by the phase separation system of lignin and catechol in aqueous sulfuric acid. The copolymerization was also performed with urushiol to afford the corresponding copolymers in high yields. The polymerization mechanism was estimated by the IR and pyrolysis GC‐MS measurements, suggesting that the polymerization proceeded mainly at the catechol ring through a quinone radical intermediate. The thermal properties were measured by the DSC, TG, and TMA analyses, indicating that the polymers had high thermal stabilities because of the crosslinked structures. In addition, it was found that the resulting polymers had the affinity of bovine serum albumin (BSA) and glucoamylase. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 824–832, 2009     

Exponential and Gaussian concentration of 1-Lipschitz maps

In this paper, we prove an exponential and Ganssian concentration inequality for 1-Lipschitz maps from mm-spaces to Hadamard manifolds. In particular, we give a complete answer to a question by M. Gromov.     

Proton-neutron quasiparticle RPA and charge-changing transitions

General formulae for a proton-neutron QRPA calculation are presented. All terms in the RPA order are retained, and no specific assumptions on the residual interaction and one-body charge-changing transitions are made. QRPA phonon correlations are introduced in first-order perturbation for quasiparticle transitions from odd-mass and odd-odd parent nuclei.